
---------1---------2---------3---------4---------5---------6-----

            RiverPro/RioPro Firmware Upload Instructions
                         as of:  OCT-2016      
                  ===============================
----------------------------------------------------------------
1. Connect the ADCP
----------------------------------------------------------------
Connect the serial cable and apply power as described in the 
RiverPro/RioPro manual.

----------------------------------------------------------------
2. Modify the batch file
----------------------------------------------------------------
- Open the "RP Upgrade Script" file with notepad.
- Edit the "set port=" line to be the connected COM port
   (e.g. set port=6  means use COM6).
- Save and close the file.

----------------------------------------------------------------
3. Run the batch file
----------------------------------------------------------------
Double-click on the "RP Upgrade Script" file.



